lock plus

Heirloom Traditions Paint Bond-N-Flex Vinyl & Leather Repair, 8oz Kit

Finish All Paint
$64.99

BOND-N-FLEX, Easily Repairs Vinyl & Leather.  Do you have a sofa or auto seat that has torn, been scratched by your cat, chewed by your dog, etc?  BOND-N-FLEX is here to save the day.  Don't throw out your torn leather & vinyl before you try this!  

 

NEW LOWER PRICE!  

KIT CONTAINS:

1-8oz Container of BOND-N-FLEX

1-16oz Finish All Paint (in your choice of color)

1-Spreader to apply BOND-N-FLEX

1-Chip Brush (to get in crevices)

1- Pair of gloves

1- Sanding block

1- 3" Foam Roller with Disposable Tray (to apply paint)

 

This size will typically do a sofa with 2 good size repairs and not a drastic color change.  If doing a larger piece or making a drastic color change, you may need an additional pint of Finish All Paint.  

 

WORKS ON:

* Tears & Holes

* Delamination

* Scratches

* Burns

 

BENEFITS:

* Paintable

* Sandable

* Flexible

* Durable

* No-Shrink

  

#1 Prep the surface with the non-acetone finger nail polish remover.  Pay special attention to the areas where skin/hair would touch such as headrest, footrest, armrest. 

#2-basic application of Bond-N-Flex put on a smooth layer to fill gaps (See Videos on Youtube or attached to this listing)

#3  Allow BNF to dry for 24 hours. 

#4 Sand if necessary with a medium grit sanding block. 

#5-Paint with Finish All Paint #6 repeat steps 2-5 if necessary to achieve desired coverage and results.

 

Note:  If repairing peeling bonded leather, you MUST REMOVE all of the loose before applying Bond-N-Flex.  This is only a band-aid on Bonded Leather.  The only way to permanently repair peeling bonded leather is to peel it completely from the piece and paint it with  Finish All Paint.  No Bond-N-Flex needed if you do that.  We cannot guarantee results on an already damaged surface.  

 

Tips:  Do not apply in freezing or extremely hot temperatures.  Best application is in temperatures of 65-85 deg F.  

 

Open Time/Able to reposition:  15 mins                 Dry Time:  24 hours                         Full Cure Time:  14 days

 

Handling-Protect surrounding area and clothes from spills and splatters.  Protect your hands with gloves.  

 

Clean up-Clean with soap & water.  Do not allow product to dry on tools.  

 

Storage-Keep lid on at all times when not in use.  Store at room temperature between 65-85 degrees for best shelf life.  Protect from freezing temperatures.  

 

 

Read more
BOND-N-FLEX Kit Colors required
Current stock 0
Add to wishlist

Description

BOND-N-FLEX, Easily Repairs Vinyl & Leather.  Do you have a sofa or auto seat that has torn, been scratched by your cat, chewed by your dog, etc?  BOND-N-FLEX is here to save the day.  Don't throw out your torn leather & vinyl before you try this!  

 

NEW LOWER PRICE!  

KIT CONTAINS:

1-8oz Container of BOND-N-FLEX

1-16oz Finish All Paint (in your choice of color)

1-Spreader to apply BOND-N-FLEX

1-Chip Brush (to get in crevices)

1- Pair of gloves

1- Sanding block

1- 3" Foam Roller with Disposable Tray (to apply paint)

 

This size will typically do a sofa with 2 good size repairs and not a drastic color change.  If doing a larger piece or making a drastic color change, you may need an additional pint of Finish All Paint.  

 

WORKS ON:

* Tears & Holes

* Delamination

* Scratches

* Burns

 

BENEFITS:

* Paintable

* Sandable

* Flexible

* Durable

* No-Shrink

  

#1 Prep the surface with the non-acetone finger nail polish remover.  Pay special attention to the areas where skin/hair would touch such as headrest, footrest, armrest. 

#2-basic application of Bond-N-Flex put on a smooth layer to fill gaps (See Videos on Youtube or attached to this listing)

#3  Allow BNF to dry for 24 hours. 

#4 Sand if necessary with a medium grit sanding block. 

#5-Paint with Finish All Paint #6 repeat steps 2-5 if necessary to achieve desired coverage and results.

 

Note:  If repairing peeling bonded leather, you MUST REMOVE all of the loose before applying Bond-N-Flex.  This is only a band-aid on Bonded Leather.  The only way to permanently repair peeling bonded leather is to peel it completely from the piece and paint it with  Finish All Paint.  No Bond-N-Flex needed if you do that.  We cannot guarantee results on an already damaged surface.  

 

Tips:  Do not apply in freezing or extremely hot temperatures.  Best application is in temperatures of 65-85 deg F.  

 

Open Time/Able to reposition:  15 mins                 Dry Time:  24 hours                         Full Cure Time:  14 days

 

Handling-Protect surrounding area and clothes from spills and splatters.  Protect your hands with gloves.  

 

Clean up-Clean with soap & water.  Do not allow product to dry on tools.  

 

Storage-Keep lid on at all times when not in use.  Store at room temperature between 65-85 degrees for best shelf life.  Protect from freezing temperatures.  

 

 

Reviews (14)

Write a review

Bond n Flex

This was so easy to work with and the end result far exceeded my expectations.
Posted by Lorrene on Oct 22nd 2019

Bond and Flex

Used it on a vinyl footstool. Smoothed out the tear and filled small holes with only about 4 very light layers. It was quick dry between layers. I waited overnight to paint it. Paint covered smoothly with two coats and other than the slight bump it was not noticeable. Someone who did not know I had patched it, did not notice the bump until I pointed it out.
Posted by Tia Clamp on Oct 14th 2019

Bond n Flex

Just started my project this morning and was so pleased with how it applies and the ease of cleaning. Differently see this being my go to for other projects.
Posted by Cathy Hays on Aug 23rd 2019

Videos

Additional info

SKU: BONDKITMSTR
Weight: 48.00 Ounces